background image

FEATURES AND OPERATIONS

Remote starter with MANUAL transmission

For safety, you must perform an “Exit Sequence” to be able to start the engine by remote later. The following steps must be performed :

          1.   You are seated in the vehicle, the engine is running with the key in the ignition and the system is not in valet mode. Make sure all doors,
                the hood and the windows are closed.
          2. Place the gear shifter in NEUTRAL position.
          3. Set the emergency brake (hand brake).
          4. Release the brake pedal. 

If the option #14 (Automatic Sequence) is enable, go to step 6.

          5. Press on start button          . 
          6. The parking lights will flash once and stay ON. Remove the key from the ignition. The engine should keep on running.
          7. Open the door(s) and exit the vehicle.
          8. The engine will automatically shut down 3 seconds after the last door is closed. The system is now ready to start by the remote.

(Exit Sequence Activated)

Note :

Opening any door or the hood after the “Exit Sequence” is activated, will cancel it. If you try to start the engine by the remote, the parking lights will 
flash 8 times and the engine will not start. In that case, you must perform the “Exit Sequence” again.

5

Summary of Contents for POWERStart P8U-FM











Reviews: