background image

FEATURES AND OPERATIONS

Arming and Lock the doors:

To arm the system will also enable the starter kill and lock the doors (if installed). If you try to arm the system and you’ll hear 4 (hood), 5 (doors) or 
6 (trunk) chirps, one of the protected zones is opened. The system will ignore the defective zone and force the system to arm. Consult your installer 
to verify your system.

Disarming and Unlock the doors:

To disarm the system will also disable the starter kill and unlock the doors (if installed). If you hear 5 chirps when you disarm the system, it means 
that the alarm has been triggered while you were away.

6

Remote Engine Starter:

To press on the start button          will activate the remote engine starter. Parking lights will turn ON for 2 seconds, the engine will start 6 seconds 
later. Parking lights will stay ON as long as the engine is running 3, 6, 12 or 24 minutes (depending on setting). If the engine does not start, the 
system will try a second time. If after the second try, the engine refuses to start, the system will shut down completely. You may be experiencing a 
mechanical problem. 

To turn the engine off while the engine is running, press on start          button again. 

Passive Arming:

If option #13 is set to “Passive Arming”, the system will arm automatically 30 seconds after the last door is closed.

Summary of Contents for POWERStart P8U-FM











Reviews: