FEATURES AND OPERATIONS
7
Keyless Running Mode
The keyless running mode allows to keep the engine running without the key in the ignition. To activate this mode, the following steps must be
performed :
Automatic Vehicle:
1. You are seated in the vehicle, the engine is running with the key in the ignition and the system is not in valet mode. Make sure the hood
is closed and do not press on the brake pedal.
2. Press on the start button . The parking lights will flash once and stay ON to confirm this mode.
3. Remove the key from the ignition. The engine should keep on running.
4. Exit the vehicle, close and lock all doors. The engine should keep on running for 3, 6, 12 or 24 minutes (depending on setting).
Manual vehicle :
1. You are seated in the vehicle, the engine is running with the ignition key and the system is not in valet mode. Make sure all doors, hood
and windows are closed.
2. Place the gear shifter in NEUTRAL position.
3. Set the emergency brake (hand brake).
4. Release the brake pedal.
If the option #14 (Automatic Sequence) is enable, go to step 6.
5. Press on the start button .
6. The parking lights will flash once and stay ON. Remove the key from the ignition. The engine should keep on running.
7. Open the door(s) and exit the vehicle. During the door(s) is/are opened, press on the start button .
8. Close and lock all doors. The engine should keep on running for 3, 6, 12 or 24 minutes (depending on setting).
