1.
Dispacking
Thank you purchasing G-Lites Moving Head Beam 300. For your own safety, please read this
manual before installing the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following instructions.
Meanwhile, please keep this manual well for future needs.
G-Lites Moving Head Beam 300 is made of a new type of high temperature strength of
engineering plastics and cast aluminum casing with nice outlook. The fixture is designed and
manufactured strictly following CE standards, complying with international standard DMX512
protocol. It’s available independently controlled and linkable with each other for operation.
And it is applicable for large-scale live performances, theater, studio, nightclubs and discos.
The light adopts powerful Philips MSR GOLD 300/2 MINI FAST which features high brightness
and stability. Please carefully dispack it when you receive the fixture and check whether it is
damaged during the transportation. And please check whether the following items are included
inside the box:
Beam 300----------- one Signal Cable----one
Omega Clamp------Two User Manual----one
2.
Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the device
switched off until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Summary of Contents for Beam 300
Page 1: ......
