gm-elektronik.swiss | adm@gm-elektronik.swiss
GM-1525-B
Page 20 | 23
oi_GM-1525-B_02_en
While an FM station is playing, the screen shows one of the two following sets
data:
• If RDS information is available, by default the service name (i.e. station name)
is displayed. You can cycle through further RDS information by pressing
Info
.
Each time you press
Info
, another set of information is displayed, cycling
through RDS radio text, RDS programme type, frequency and current date
• If no RDS information is available, the currently tuned frequency is shown
8.3. Settings
Scan settings:
By default, FM scans stop at any available station. This may result in a poor
signal-to- noise ratio (hiss) from weak stations. To change the scan settings to
stop only at stations with good signal strength, select
Menu > Scan setting >
Strong stations only? > Yes
.
Audio settings:
By default, all stereo stations are reproduced in stereo. For weak stations, this
may result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, se-
lect
Menu > Audio setting > FM weak reception: Listen in mono only > Yes.
9. AUX in mode
AUX in mode plays audio from an external source such as an MP3 player.
To play audio with AUX in mode,
1. Turn the volume low on both the unit and, if adjustable, the audio source
device
2. Connect the external audio source to the AUX In 3.5 mm stereo socket
3. Either press
Mode
until the display shows AUX in or select
Menu > Main
menu > AUX in.
4. Adjust the volume of the unit (and, if necessary, the audio source device) as
required.
10. Alarms and sleep
As well as a clock / calendar, there are two versatile wake-up alarms with snoo-
ze facility, and a sleep function to turn the system off after a set period. Each
alarm can be set to start in a particular mode.
To set the clock / calendar – see Getting started / setup.
10.1. Alarms
To set or change an alarm, either press
Alarm
or select
Menu > Main menu
> Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
• Enable: On / Off
• Frequency: Daily, Once, Weekends or Weekdays
• Time
• Mode: Buzzer, Internet radio, DAB, FM
• Preset: Last listened or 1–10
• Volume: 0–20
To activate the new settings, scroll down and select
Save
. The screen shows
