CLEANING
Pg.11
1) Before cleaning, turn off the main switch and remove the plug from the socket;
2) Do not use accessories metal (knife, spoon, etc.) does not attack the stainless steel
parts;
3) Never use running water to clean the bath because moisture can damage the bearings;
4) to clean the exterior, we recommend using a damp cloth with mild soap;
5) Do not use the water hose as it could cause a short circuit and damage the electrical
components such as the engine characteristics and safety;
6) cleaning your computer should always be done after use;
8) This product should not be cleaned with water jet;
9) The machine can not be immersed for cleaning.
6 - Remove or cylinder 1 as indicated is not desenho na page 17.
7 - Com uma chave help of fenda (item 2) place eixo do not bore 3 e 4 for withdrawal do
parafuso 'E' isso após you remove eixos 3 e 4.
8 - For a withdrawal do item 5 (esteira) remove or Mancal of eixo 6, and remove hair
feature or item 5 na side.
9 - For a withdrawal do item 7 (esteira) remove or Mancal item 8 or 7 hole hair do
Mancal removed, repeat passo esse mesmo for a withdrawal gives lower esteira.
10 - Introduza or novo processo filter and faça or reverse to mount seu Equipment.
7) Do not use abrasive cleaners, only mild soap;
