Page 15
TrackSide R/C - Hardware Specifications
6th Generation
Mechanical
Enclosure
4.2” X 3.1” X 2.5”H
3D printed ABS or PETG, Black
Snap fit between base and cover/fan assembly
User Connections:
Barrier Strip for Power In, Track Out, accepts 12-22 AWG terminal lugs.
Screw Terminals for Station Stop, accept 26-20 AWG wire.
RailBoss 4 TrackSide Transmitters
2.4 GHZ radio with internal antenna: 3 1/4” X 2 1/2” in contoured case.
Electrical
Power Input (Terminals IN +,-)
7VDC min to 25VDC max, less than 1V p-p ripple.
Reverse polarity protection (prevents damage, but will not operate)
Track Output (Terminals OUT, No polarity)
10 amps max at 100% duty cycle
Fuse, automotive blade fuse, type ATC, 5, 7.5, or 10A
PWM (Pulse Width Modulated), 20 KHZ
Max amplitude: Input voltage minus driver loss
Fan - Runs continuously
Radio Rx and Tx
FCC,IC,CE certified and approved. IEEE 802.15.4.
2.4GHZ, Direct Sequence Spread Spectrum, motor noise and interference tolerant, built-in antenna.
Range: Up to 800 ft.
TX batteries: Two AAAA alkaline batteries
Warranty - 12 months from date of purchase. Post warranty repairs can be made for a modest fee.
