Page 16
Meanwell Power Supplies
You will need to provide or purchase your own AC power cord and connect it to your Meanwell power supply.
Any 3-wire power cord will work. Set the power input switch on the side of the power supply for 115 VAC U.S.
Output voltage should be 24 VDC maximum for use with the G-Scale Graphics Trackside R/C or Track Throttle.
But no adjustment should be necessary as received.
Crimp some spade connectors
on the wire ends for a nice neat
connection. The AC input terminals
on your power supply may be ex-
posed, so you may want to insert a
piece of styrene over them for add-
ed safety.
