Page
12
3.5
I
MPORTANT INFORMATION AND GLOSSARY OF TERMS
The terms used in batch confguration of the data logger are explained below. For details,
please refere to the software help file.
Figure 5 Batch Configuration of the Data logger
1.
ID Name:
User should assign an appropriate ID Name of maximum 10 alphanumeric
characters.
2.
Batch Name:
User should assign an appropriate batch name of maximum 10
alphanumeric characters.
3.
Alarm High/ Low limt:
The set point values for the individual alarm high/low trigger.
4.
Unit of Temperature:
The unit for temperature is
°C
.
5.
Sensor Type:
User can select the required sensor input (refer the table 4) from the
options.
6.
Range Low:
It is used for selecting the minimum output value that should be displayed on
the LED display measured by the sensor.
7.
Span:
It
is the total range of values that a user wants to measure. It indicates the total
interval in which all the output values will be displayed.
8.
Offset:
Offset is the amount of deviation that occurs in the output due to calibration
errors of the sensor. If not required, the default value should be kept (zero).
Summary of Contents for LM-U PRO Series
Page 1: ......
