Page
18
➢
The Data logger “Display ON”. Both L
EDs are Flashing for <10 Sec.
➢
Reconfigure the data logger, see the section Configuring the data logger.
➢
Battery replacement stops a measurement that is currently running. However, stored
measurement data are preserved.
➢
When new battery is inserted, the min/max value for the current data will be calculated
from that time onwards and batch recording is resumed.
Note:
It is advisable to reconfigure the data logger after changing the battery.
5.2
B
ATTERY
D
ISPOSAL
➢
Dispose or recycle the battery in accordance with your local regulations.
➢
Do not expose the Data Logger to extreme temperatures as it may lead to the
destruction of the battery and may cause injuries.
5.3
C
LEANING THE INSTRUMENT
➢
If the housing of instrument gets dirty, clean it with damp cloth.
➢
Ensure that no liquid enters the inside of the housing
➢
Do not use any aggressive cleaning agents or solvents!
“Warning, Battery may explode if mistreated. Do not
recharge,
disassemble, or dispose of in fire.”
“
Warning, Battery may explode if mistreated. Do not recharge,
dissemble or dispose of in fire
.”
“
Warning, Battery may explode if mistreated. Do not recharge,
dissemble or dispose of in fire
.”
“
Warning, Battery may explode if mistreated. Do not recharge,
dissemble or dispose of in fire
.”
Summary of Contents for LM-U PRO Series
Page 1: ......
