G-Tek Corporation Private Limited
23
C
ONFIGURATION
Usage of Keys:
To enter in the function menu for modification or to come out from the function
menu/submenu.
Up Key is used to increment the parameter value. It is also used to go to the next
parameter/sub-menu.
Down Key is used to decrement the parameter value. It is also used to go back to the last
parameter/sub-menu.
To store the parameter value and use to enter in the function for modification.
To Return from the Sub-Menu.
7.1
A
UTHENTICATION
P
ASSWORD
If device is with password enabled option, then it will allow the access of menu function only and only
if password will match and pass authentication. Basically, device will ask for 4-character password and
each will be 0 to 9.
Each time to access menu, authentication is necessary. The procedure for authentication and to enter
password, follow the below mentioned procedure by pressing the appropriate buttons given on the
front panel of the LmNet.
Note
: UP key is used to increment number and DOWN key is used to shift cursor right by one position.
Alarm off acknowledgement condition keys.
Figure 20
Password entry Procedure
PASSWORD
1 128.55
0000
1200
1230
1234
