G-Tek Corporation Private Limited
27
7.3.1.2
Device Address
Address of the devices that can be connected to the MODBUS is from 0-255. 240 devices maximum
can be connected for communication on MODBUS, rest have been used for future development.
Note: -
To increase the digit value
To decrease the digit value
To come out from functions/ sub menu
7.3.1.3
Memory Setting (roll over/ stop on full)
To set Roll Over/ stop on full in memory setting of the devices then follow the procedure shown in
figure-25 by pressing the appropriate buttons given on the FRONT panel of the LmNet.
Press up key and down
key to change the address
96
dEv ADD
Addr
SAvE
2 126.55
Figure 24 Device Address
Figure 25 Memory Setting
roLL ovr
StP FULL
mEm SEt
SAvE
SAvE
3 26.55
