21
(picture shows the G-kit 400 Wing)
e. After you put the upper part on top of the poles wit with tighten
it to be able to install the doors.
f.
Position both doors. The right door (with the white tape) is the
one which is sliding in the second profile behind the front
door. Doors should easily slide in the profiles. If not the profile
is dirty or bent.
g. Push the top downwards till all the panels are locked up.
h. Put in the plug and the G-kit® is ready to use.
i.
The fan runs permanently as soon as the plug is connected.
All the settings are explained in the next chapter.
6.The Timer box
The timer box (picture below) contains a relay and a timer,
The sockets on the left side are for the lights and are switched on
and off by the timer.
The sockets on the right side have continuous power, 230V for the
extractor fan, irrigation systems, etc.
