35
10.2013 | G28062 | Printed in Germany
13 Guarantee and aftersales service
All deliveries are made on the basis of our General Terms and Conditions
The guarantee complies with the legal regulations and is valid in the country where the motor
was purchased. It covers material and production defects occurring under normal operating
conditions. Guarantee and liability claims in view of personal injury and damage to property are
excluded, if the latter have occurred as a result of:
•
Inappropriate use of the motor.
•
Improper installation, commissioning, operation, maintenance, and repair of the motor.
•
Operation of the motor with faulty, incorrectly fitted or non-functional safety and protection
devices.
•
Failure to observe the advice given in the Assembly and Operating Instructions.
•
Unauthorised structural modification of the motor.
•
Catastrophic events as a result of foreign-object damage and force majeure.
•
Wear.
For any guarantee claims or the delivery of spare parts or accessories, please contact your
responsible distribution company.
14 Connection diagram
Connection for ELTRAL K35 - 24 V
The connecting cable of the drive is approx. 2 m long. If the distance between drive and wall switch
is more than 2 m, the cable must be extended (see section „8 Electrical installation“ on page 28).
The connection must be made according to the following wiring diagram:
1
2
3
+
24 V DC
–
1
3
2
24 V DC
Colour
Function
Black "1"
Black "2"
Black "3"
Drive
Cable
(not assigned)
If, after connection, the running direction
is contrary to that of the arrows on the wall
switch, the wires 1 and 2 must be inverted
