10
G20125
1.
Roll flat pasta maker
2.
Roll for tagliatelle
3.
Roll for spaghetti
4.
Knob for thickness
5.
ON/OFF switch
6.
Motor housing
FUNCTIONING
At the first use, pass some dough in all the parts of the 3 rolls, in order to collect eventual impurities.
-
Place the appliance on a stable and flat surface.
-
Appliance can be switched on with the switch (5), and is switched off by the same button.
FLAT PASTA MAKER
Use the flat pasta maker (1) to make pasta flat, in 7 possible thickness levels. That flat pasta can be used to
make lasagne, or can be cutted to make any format of pasta (with one of the rolls or with a knife), or can be
used to make filled pasta.
-
Place regulation knob (4) on “7” (biggest thickness). Insert a ball of dough previously prepared in the roll.
-
Accompany the passage of the dough in the rolls with both hands (one over the roll and one under), tending
the dough to get a better result. Fold the dough in two and put flour. Pass again the dough in the rolls and
repeat operation even several times until a homogeneous sheet is obtained.
-
To make the sheet more thin, move the knob (4) to the next positions (7 is the thickest and 1 the thinnest).
-
Repeat above operations in various positions of the knob, going from thick to thin, until obtaining the
desired thickness. Put flour before every passage in the rolls.
CUTTING ROLLS
After having obtained the sheet of pasta as described in the paragraph “Flat pasta maker”, this sheet can be
cutted, making it pass in one of the rolls included. Before inserting the sheet in the cutting roll, is advised to
wait 10 minutes in order to dry the sheet of pasta and have a better cutting.
You can obtain 2 formats: spaghetti and tagliatelle.
CAUTION: to not make the motor work continuously for more than 90 minutes. In this case make it
cool down for 30 minutes.
When operation is finished, stop appliance with the switch (5).
After finishing operation, clean as described in the paragraph “Cleaning”
CLEANING -
Unplug the unit
.
CAUTION: do not wash in dishwasher. Do not wash with water or with detergents.
Do not immerse the main body (6) in water, only wash it with a damp cloth and non-abrasive detergent.
Avoid any infiltration of water inside motor housing.
Flat pasta maker and double rolls cannot be washed in the dishwasher. To remove big residues stucked, do
not use hard objects, but a gentle brush. To remove flour of soft residues, use a soft brush or a damp cloth.
TECHNICAL FEATURES
•
Power supply: AC 230V
~
50Hz. Power 70W
•
Accessories: flat pasta maker, 2 cutting rolls for tagliatelle and spaghetti
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can
be recycled. It’s our duty to contribute to the ecological health of the environment following the correct procedures for
disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives
introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly
disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place
of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.
