IMPORTANT WARNINGS
a. The release setting requires a specialized understanding of multiple factors.
Adjustments to release settings should only be made by a G3 authorized dealer.
Any improper adjustment of release setting by any unauthorized person will put the
skier at risk of injury and void the warranty.
b. Prior to each use the binding should be checked for any broken parts, correct
release function, and contamination. If anything is defective or broken please
return the binding to a G3 authorized dealer for service.
c. Since skiing has inherent risks, do not overestimate your ability when describing
your skiing level to the authorized dealer who will set your release setting. If in
doubt, underestimate your ability, and return to the authorized dealer to have an
increase in retention made.
d. Skiing the G3 ZED binding without a ski brake or a ski leash can put others
at risk, as well as risk the loss of the ski and binding. A ski brake alone is not
sufficient to protect against the loss of a ski in deep snow. The use of a ski leash
is not recommended in avalanche terrain.
e. Ski touring is a demanding sport in which environmental conditions and terrain
can change quickly and be hazardous. Obtain proper training and rescue
equipment before ski touring, and don’t overestimate your abilities. Always make
use of all available weather and avalanche condition information prior to touring.
Never ski tour under the influence of any drug or mind changing substance.
f. Never ski tour alone.
g. Due to the exposure to environmental conditions that are common during ski touring
(ice, snow, water, dirt) the release setting may change. Extended or incorrect storage
can also affect release setting. At the start of each season, the release setting should
be checked using specialized equipment at a G3 authorized dealer.
h. Specialized alpine touring boots with “TECH” inserts are required for use with G3
ZED bindings. Any non compliant boot or excessively worn “TECH” inserts can
alter the release setting. The boot is an integral part of the release system. The
release setting should be checked using specialized equipment at an authorized
dealer with the intended boot(s) for use.
i. During transport, bindings can become contaminated with salt, dirt and other
contaminants that can alter or impair the release function. Cover your bindings
during transport to reduce this risk.
j. Use only genuine G3 accessories for ZED bindings to ensure that the release
setting or any other design feature is not compromised
5. TIPS FOR USING THE ZED BINDING
clear
ice
and
snow
a. Before every descent, make it your practice to check for and clear any snow under the toe assembly
(P)
and heel assembly
(Q)
prior to skiing. After stepping into the toe, and before locking the heel down into ski mode, it is recommended to pivot the boot
on the toe pins a couple of times, to ensure any ice in the boot inserts gets cut away.
using
your
pole
to
clear
snow
b. Your ski pole can be used to clear snow from the binding under the toe jaws
(R)
.
switching
from
tour
mode
to
ski
mode
using
your
ski
pole
c. You can use the end of your pole to lever off your boot to switch the heel from ski tour mode
into ski mode
(S).
using
the
leash
d. To connect the leash to the control arm tower on the toe of the binding, connect the wire loop
end of the leash by pushing the loop through the hole in the control arm tower. Then pull the
carabiner through the wire loop and snug it up.
e. When using the leash, clip the carabiner either directly to your boot buckle, or to the includ-
ed wire loops which you can girth hitch to larger boot buckles. When in avalanche terrain, or
somewhere you do not want to be leashed in, stow the leash by clipping it to itself by the
leash clip or remove it from the binding.
P
Q
R
S
Clear ice and snow from this area.
Clear ice and snow from this area.
Clear ice and snow from this area.
Rotating the heel into ski mode.
ZED
ZED
OPERATING
INSTRUCTIONS
1. Toe Assembly
2. Toe Pin
3. Toe Tour Mode Lever
4. Heel Assembly
5. Heel Pins
6. Heel Lift
7. Heel Assembly with Brakes
8. Brake (optional, sold separately)
9. Coiled Leash (optional, sold separately)
1
2
3
4
5
6
9
Control arm tower hole
7
8
3177-7316
G3-ISL-E002 REV F
PATENTS #US9597578, #DE202009019128, # DE202009019178 & PATENTS PENDING
BOOT COMPATIBILITY
a. The ZED bindings are only compatible with alpine touring ski boots (ISO
9523) with Tech compatible inserts.
b. Bellowed touring boots or NTN type boots with TECH inserts are
not currently supported; the flex creates an unpredictable release
environment.
WARRANTY
G3 warrants that the product will meet the specifications stated in the
instructions and G3 agrees to replace the product free of charge if the product
does not conform to the specifications. Notice for replacement must be given
within 60 days of the discovery of the defect.
In consideration of the above promises by G3, the buyer agrees to and accepts
the following conditions:
That this warranty is in lieu of all other warranties, expressed or implied;
That ALL WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY EXCLUDED AND/OR WAIVED;
That the buyer’s sole remedy shall be to obtain replacement of the product
free of charge from G3; and
That this remedy is in lieu of all other remedies or claims for damages,
consequential or otherwise, which the buyer may have against G3.
G3 shall have no liability for Any loss or injury caused, in whole or in part, by its
actions, omissions, or negligence, or for contingencies beyond its control;
The warranty extends only to you, the original purchaser. It is not transferable
to anyone who subsequently purchases the G3 from you.
a. Any custom modifications to the binding will invalidate the warranty, and
could put the skier at risk of injury.
b. Any unintended use of the binding will void the warranty, and could put
people at risk.
For the most current information, videos and instructions on mounting and
using your ZED bindings go to:
http://www.genuineguidegear.com
For full G3 product warranty details please visit:
http://www.genuineguidegear.com/service/g3-product-warranty
Models: ZED 9, ZED 12
