background image

 
4) Make a cell phone call

       

Dial a number on your phone as normal, ( but don’t do this if you are on road 

for    your safety)    the sound will be automatically heard in your headset 

    notice: some phones,    like Panasonic x70, will   

not send the audio to the headset, you may have   
to press the Phone/Play key to transmit the sound   
to your headset   

5)  Dial  the  last  number        Press  the  Phone/Play  key  2-3  seconds,  it  will  dial  the  phone  number  that  you 

dialed last time. (note: some cell phone do not support this function) 

Interphone Function 

Set up for bike- to- bike and rider-to-pillion intercom: pairing 
Pairing is a one time process that is required for mutual recognition between a G6 and other G6.once the two 
headsets are paired, they will retain paired whenever they are 

within range

Please note that you can speak via intercom to one buddy headset at a time. 
 
Note:   

a.

 

when you are pairing two G6s, you must keep other G6s in status of power off.     

b.

 

You could pair your G6 with maximum total five G6s, you also could only pair your G6 with one G6.   

c.    Please 

note !

 :

 because the POWER/RIDER 

A

 key is a multifunctional keyso

 once you have defined one 

of other G6as rider A, the method that pair your G6 or other G6s with rider A will be different to the 
way  of  pairing  with  rider  B,  C,  D,  E,  F.  before  you  pair  your  G6  with  another  G6(rider  A)  by 
POWER/RIDER A key, please confirm your G6 is in status of power off. 
 

1) Pairing two G6s   

Maybe  you  only  need  to  communicate  with  a  person  (a  rider  or  a  passenger),  you  can  simply  pair  two  G6
according to below step: 
 
To be sure that your 

G6

 and rider A(another G6) are in status of power off. 

Short press(< 1 second) Reset key on your 

G6

 and on another 

G6

, simultaneously hold the POWER/RIDER A 

key on your 

G6 and

 hold the POWER/RIDER A key on another 

G6

 until the red & blue LED of the two pairing 

G6

s flash, short press the POWER/RIDER A key on

 one of

 

G6

, 5-9 seconds later the red LED of both G6s will 

extinguish and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now 
you could talk with another 

G6

).   

     
3)

 

Pairing all G6s     

 

 
 
 

 
 
 

-------------------------------------------------------------------------9------------------------------------------------------------------------------ 

Summary of Contents for BT Interphone

















Reviews: