GT905
BEFORE USING THE APPLIANCE:
Before charging the beard trimmer for the first time we recommend fully discharging the battery and then fully
charging it.
1. Make sure that the appliance is switched off.
2. Plug the battery charger into the power outlet and then position the appliance into the specific seat. The
charging LED will light up and remain red for a few seconds. This means the appliance is ready to begin the
charging process. As soon as the appliance actually begins charging, the LED will change colour, turning
blue.
The first charge takes 12 hours. Subsequent charges take about 2 hours. When fully charged, the battery will
last about 80 minutes.
3. Disconnect the battery charger from the outlet once it is fully charged.
The duration of the battery varies based on usage frequency and times. To increase the lifespan of the
batteries, this procedure should be carried out at least twice every 12 months, discharging the battery
completely and recharging it for the maximum time. If the appliance is not used often, remember in any case
to carry out a charging cycle every so often during the year to keep it working efficiently. On the contrary,
when the charging is finished, do not keep the appliance connected to the mains to prevent the battery from
overcharging and damaging the appliance.
WARNING: Do not attempt to replace the internal battery of the beard trimmer. This can lead to the risk
of fire or electric shock. Tampering invalidates the warranty on the product.
CAUTION:
Lubricate the blade before the first use. Read the instructions contained in the section “HOW AND WHEN TO
LUBRICATE THE BLADE”
USE INSTRUCTIONS:
• Insert the desired attachment. This operation should always be done with the beard trimmer turned off.
• Turn on the beard trimmer by pressing the (O/I) button.
• Turn off the beard trimmer by pressing the (O/I) button.
INSERTION OF THE INTERCHANGEABLE HEADS:
The method for insertion of the two heads is identical.
There are two black plastic guides inside the upper part of the beard trimmer and there is a black lever on
each head. To insert the heads, place the black lever on the two guides; with one of your thumbs, keep it from
sliding and, with the other thumb, push toward the front of the appliance until you hear a slight click: the
insertion procedure is now complete.
The symbol on the product or on the package indicates
that the product should not be considered as normal
domestic waste; once you have decided to dispose of it,
it should be taken to the proper collection point for
recycling electrical and electronic appliances. When you
dispose of this product correctly, you help prevent potential
negative consequences for the environment and health, which
could derive from improper treatment of the product. For more
detailed information on recycling this product, contact the municipal
office, the local waste disposal service or the shop where it was
purchased.
LIMITED WARRANTY:
Duration of warranty period: 1 or 2 years depending on customer category in compliance with Directive 1999/44/EC.
For support service under warranty, please take the original purchase ticket / sales receipt to the shop where the
product was purchased. The product will be repaired free of charge or immediately replaced with similar product of
equal or greater value.
11
12
