Elnur
powered by Gabarrón | RBC | Installation Guide
6
PROGRAM MODE
In this mode, the ambient temperature is maintained
at the comfort level or at the Nightly level according
to time slots programmed as desired by the user.
1. Press the [mode] key until the corresponding icon
appears on the display.
2. Press [Clock] key to choose P1, P2, P3 programs.
Note:
To modify pre-set programs P1, P2 or P3,
see 3.5 Programming.
3.4 ADVANCE FUNCTIONS
Keyboard Lock
It is possible to lock the device during any operation
mode to avoid improper or involuntary use such as
protecting children or in a public space.
To turn on / off the keyboard, press the [mode] key
for 5 seconds. Keyboard lock icon is displayed.
TIMER 2H
The “Timer 2h” mode can be used to quickly warm up
the room or to speed up.
2. Press the [Mode] key until the display shows the
“2h” icon.
The device is activated at the maximum power for
2 hours, up to the maximum radiator temperature. The
“Timer-2h” mode is automatically deactivated after a
period of 2 hours returning to program mode. The user
can switch to another operative mode at any time by
simply pressing the [Mode] key.
ADAPTIVE START CONTROL
This function, if activated, will turn on the radiator in
advance of the programmed (Max 2 hours) to ensure
that the room has reached the desired at the set time.
Note: The function takes at least a couple of days to
reach the maximum efficiency.
OPEN WINDOW DETECTION
The “Open Window Detection” function enables
detecting of an open window by sensing a sudden
decrease of the temperature in the room. In such a
case, the device deactivates the heating element for a
maximum of 30 minutes until at which point the radiator
will resume to operate in the previously set state.
When this function is enabled, the “Open Window” icon
is shown on the display. When the device detects that
the window is potentially opened, the “Open Window”
icon starts blinking. When the function is disabled the
“Open Window” icon is not shown on the display.
3.5 PROGRAMMING
Day and time setting
1. Activate “Stand-by” mode and press the [clock] key
for more than 5 seconds to enter configuration menu.
2. With the [+] and [-] keys, scroll through the menu to
the Time function, press [mode] to confirm.
3.
Day:
The word “day” blinks for 2 seconds, with the [+]
and [-] keys select the Day and confirm with the
[mode] key.
4.
Hour:
Use the [+] and [-] keys to select the time
and confirm with the [mode] key.
5
Minutes:
Use the [+] and [-] keys to select the minutes
and confirm with the [mode] key. When finished,
the device will exit the programming menu.
Program setting
Pre-set programming P1, P2 and P3 used in program
mode can be modified by the user.
1. Activate the “Program” mode using the [mode] key.
Press the [Clock] key to choose which of the
programs P1, P2, P3 to set.
2. Hold the [Clock] key to set the time sequence.
3. Now a time sequence can be set for each day of the
week. It starts with day 1, the time zone is displayed,
the desired sequence is selected with [+] and [-]
keys. For each hour, the “Comfort” temperature (2
displayed bars) can be set by pressing [+] key and
the “Night temperature (1 displayed bar) can be set
by pressing [-].
4. Press [Mode] to confirm the first day setting and
enter next day programming.
5. Repeat the same procedure for the remaining 6 days
of the week.
Advance function activation: Open Window
Detection and Adaptive Start Control
The user can activate or deactivate these functions
as follows
1. Activate the stand-by status and press the [clock]
key for more than 5 seconds.
2. With the [+] and [-] keys scroll the menu to the “Func”
function and press the [mode] key to confirm.
3. Open Window Detection icon is displayed. Press
the [+] or [-] key to activate or deactivate the open
window detection function. Press [Mode] key to
confirm.
4. Adaptive Start Control icon is displayed. Press the
[+] or [-] key to activate or deactivate the adaptive
start control function. Press [Mode] key to confirm
and exit programming.
