GABBY CARINE Assembly Instruction Download

Page: 3 / 3

CARINE SIDE TABLE

ASSEMBLY INSTRUCTION

If the floor is uneven adjust the levelers located at the underside of the Feet, to do this lift Up

the side that need to be elevated to provide access to the levelers, turn the leveler until
adequate contact with the floor.

Attach the Brackets (C) horizontally to the top of the back of the Table using the Small Screws (A).

Screw the remaining Brackets (C) vertically 1 inch below the brackets attached to the Table

using the large screws (B).The Large Screws (B) should be screwed into a stud in the wall. Align the

Brackets vertically and string in the Retention Belt (D). Confirm Strap is securely laced and locked.

STEP 3

STEP 4

Page 3 of 3

Wall

Leveler

Summary of Contents for CARINE

Page 1: ...ON HARDWARE INCLUDE 1 1 Anti Tip Kit A 2 Small Screw B 2 Large Screw C 2 Bracket D 1 Retention Belt PARTS INCLUDE E 1 Body F 4 Feet PARTS HARDWARE TOOLS NOT INCLUDED Page 1 of 3 E 1 PC F 4 PCS Body Fe...

Page 2: ...female insert of the base and turn the Feet B clockwise until tight do the same steps to the remaining Feet Figure 1 then flip the case upright Re Tighten the bolt from inside of the drawers using Ph...

Page 3: ...t with the floor Attach the Brackets C horizontally to the top of the back of the Table using the Small Screws A Screw the remaining Brackets C vertically 1 inch below the brackets attached to the Tab...