GABOR FM-2742, User Manual

6

Installation Instructions

Installation Instructions

STEP 1: 

Installing Dual Mounting 
Brackets On Rear Of 
Flatscreen

•  Begin by aligning both 

brackets on rear of 
flatscreen device, while 
ensuring that the 
screen is resting on a 
non-scratch surface. 
The appropriate bolts 
and washers should be 
selected by measuring 
the height, size and 
position of holes on rear 
of flatscreen device, and 
determining which bolts 

and washers fit best. 
This may vary according 
to specific brand, make 
and model of flatscreen 
device.

•  Use the shortest 

configuration of bolts, 
washers and spacers for 
a secure fit. Spacers may 
or may not be required 
depending on curvature 
of flat screen device and 
rear dimensions. 

•  Ensure that brackets 

are in proper position 
by confirming that 

rectangular-shaped 
safety locking/unlocking 
cord mechanisms are 
facing downwards and 
toward each other; 
align both brackets by 
positioning them at equal 
heights and secure bolts 
tightly. 

•  Note that bolts must 

be hand-fastened into 
holes with a screwdriver 
or socket wrench to 
avoid overtightening and 
possible damage.