background image

14

Safety Warnings

Safety Warnings

1   Do not use this product for any 

flat panel screen device other than 
what it is intended for; the exact 
specifications, size parameters and 
weight limits are found both on the 
product box and in the instruction 
manual

2   It is strongly recommended that this 

product be installed by a qualified 
professional or installation contractor; 
Gabor takes no responsibility for 
any product damage or personal 
injury resulting from mishandling, 
incorrect mounting, faulty assembly 
or improper use of this product

3   This product has been designed 

specifically for mounting directly  
on wooden studs or concrete 
walls; depending on wall type and 
material, the use of additional 
appropriate mounting hardware and/
or accessories such as heavy-duty 
anchors may be required

4   The supplied mounting hardware is 

not intended for use on metal studs 
or cinderblock walls, and may not be 
appropriate for old or weak walls; 
it is best to consult with a qualified 
professional to determine whether 
your walls are capable of supporting 
this bracket

5   Product must always be mounted 

directly to center of wooden wall 
studs or on a solid concrete wall 
to properly support the weight of 
the device; the wall may require 
reinforcement prior to mounting 
(i.e. metal studs; plaster on lath; or 
irregular spacing of studs), which 
should be determined by a qualified 
professional

6   Do not mount device on structures 

that may be affected by vibrations or 
noticeable impacts; do not install near 
heater, fireplace or any other source 
of direct heat energy

7   It is recommended that at least 2 

people should perform the installation 
process to prevent injury from 
mishandling or dropping of the 
product and/or flatscreen device; 
proper safety gear and tools must be 
utilized at all times when installing 
product

8   When installing this product, be sure 

to refer to mounting instructions 
detailed in this manual; failure to 
abide by mounting instructions may 
void product warranty

9   This product may contain small parts 

which can possibly pose a choking 
hazard; keep out of reach of children 
and pets

10   Excessive exposure to liquids may 

damage the finish of this product; 
when cleaning this product, use only 
a mild detergent solution and quickly 
wipe dry with a soft cloth

Summary of Contents for FM-4265

















Reviews: