GABRIEL KERAMIK AB
STUDIO2 • 23
1
2
3
4
40
39
41
Cassette installation
Install the last vemiculite plate on
the two tubes in the cassette and
push it as far back as possible.
This improves the combustion and
forces the flame forward.
Cut the
sealing block
to shape,
use e.g a hack saw blade.
Ensure that it fits exactly
and
seals around the base block
walls
.
Make sure the sealing block is not
pushed to far in as it will restrict
the inlet convection air flow to the
cassette.
Press the fan carefully into the pre
cut hole in the sealing block.
Note!
The fan must be moun-
ted so that air is sucked into the
fan. The air flow passes through
channels in the cassette and exit
through the upper front edge.
Fan installation
Insert the steel plate vertically
over the edge of the cassette. Turn
the plate horizontally and pull it
backwards firm and tight against
the top of the fire box block so that
it at the same time is fitted tight
between the cassete and the body
as shown in picture 3 and 4.
Sealing block
