243
5. Driving guide
NOTE
● Specific special tools and equipment
shall be used for MMW radar sensor
adjustment and calibration. If the MMW
radar sensor needs adjustment and
calibration, please go to the GAC Motor
authorized shop for relevant operation.
● Inoperative or misadjusted MMW radar
sensor can affect ACC, integrated cruise
assist, FCM and pedestrian detection
system.
Special considerations on MMW radar
sensor
The MMW radar sensor is installed at the
front of the vehicle, and no obstacle shall be
present in its detection area. Do not install the
obstacles such as the license plate frame when
installing the front license plate. Otherwise,
the performance of MMW radar sensor will
be affected, resulting in failure of the ACC,
integrated cruise assist, FCM and pedestrian
detection.
CAUTION
● If the MMW radar sensor is dirty,
blocked by the license plate frame, or
covered by any foreign matters such as
heavy rain, ice, snow, mud, the related
functions of the radar sensor may not
work and the instrument cluster will
give disable/fault indication for these
functions. To restore these functions
to normal, clean the dirt and/or foreign
matters.
● When there is strong reflection of the
MMW radar ultrasonic wave (e.g: in a
car park), related functions of MMW
radar sensor may be affected.
● Prevent the front and surrounding of
the MMW radar from being covered by
objects like sticker, driving assistance
lamp, license plate frame, etc.;
otherwise the related functions of the
radar sensor may be affected.
● It is recommended to use a brush to
remove the snow on the sensor surface;
It is recommended to use a non-soluble
de-icing spray to remove ice from the
sensor surface.
CAUTION
● Maintenance of the front body of the
vehicle may cause change in the radar
sensor direction and affect related
functions of MMW radar (ACC/ICA/
FCM). Therefore, please go to the GAC
Motor authorized shop for service in
time.
● If the MMW radar sensor is damaged
or its direction changes, please turn
off the related function of MMW radar
(ACC/ICA/FCM), and go to GAC Motor
authorized shop to recalibrate the MMW
radar sensor in time.
● The direction of the MMW radar sensor
may change due to vibration, for
example, when the area near the front
bumper radar collides with the curb/
flower bed. Change of the direction of
the sensor may affect the performance
of the functions dependent on the radar
or even cause abnormal deactivation of
these functions.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
