339
8. Accident handling
For models with front vertical grille *
Front
Rear
-
Pry off the towing hook cover in the
a r ro w e d p o s i ti o n u s i n g a s l o tte d
screwdriver wrapped with a cloth.
Front
Rear
-
Take out the towing hook
①
and wheel
bolt removal wrench
②
from the tool kit
in the trunk.
-
Screw the towing hook
①
clockwise into
the thread hole.
-
Insert the wheel bolt removal wrench
②
into the round opening of the towing hook,
and turn the wheel bolt removal wrench
clockwise to make the towing hook be
firmly screwed into the thread hole.
Precautions for towing
Before emergency towing, be sure to follow the
instructions below:
-
Hazard warning lamps of both towing and
towed vehicles must be turned on, and
local traffic regulations must be complied
with.
-
The towing hook must be firmly tightened
in the thread hole. Otherwise, the towing
hook may slip out of the thread hole
during towing.
-
The towed vehicle must be shifted into “N”
gear.
-
For the towed vehicle, set the vehicle
power switch to the “ON” position and
turn the steering wheel back and forth to
confirm that the steering wheel can be
turned.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
