115
4. Operation of systems and equipment
CAUTION
● When the system is in the nap mode
setting state: If any seat motor is not
in a static state when you click “Save
position and enable”, the system will
ignore this memory request signal,
exit the setting state of nap mode, and
perform the recovery action of nap
mode.
● When the system is in the nap mode:
If any seat motor is not in a static state
when your click “Save”, the system will
ignore this memory request signal and
maintain the nap mode.
Nap mode*
When the vehicle power switch is set to the ON
position and the transmission is in P gear, the
driver can set and save the nap mode position
through “Drop-down menu → Nap mode”, and
then have a rest and relax.
-
When entering the nap mode for the first
time, it is necessary to set and save the
nap mode position. After adjusting the
seat position, click “Save Position and
Enable” to keep the nap mode at the
current position.
-
When the nap mode has a memorized
position and you enter the nap mode
again, you can click “Enable” to enter
the nap mode, and click “Cancel” to exit
the nap mode and return to the previous
position.
-
After entering the nap mode, if the seat
position is adjusted, the box will be
popped up to prompt “save” the new
position or “off mode”.
-
When the nap mode has a memory
position, if the user switches out of P gear,
the nap mode will be exited and the seat
will not move; When the vehicle power
switch exits the ACC/OFF position, the
user can exits the nap mode by vioce,
or click the “Exit” through the central
controller to exit nap mode. After the
system exits the nap mode, the seat
returns to the previous position.
4.4.3 Rear seat
Folding down of rear seat backs
-
Folding down: Press the rear seat back
switch as arrowed to fold down the rear
seat back.
-
Restore: Push the rear seat back directly
backward until the seat back is locked.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
