background image

1

Governors America Corp. © 2021 Copyright All Rights Reserved

103 Series Integral Electric Actuator   4-2021-D2     PIB2045 

103 Series

Integral Electric Actuator

The 103 Series Integral Actuator is a field-proven proportional actuator 

designed  to  mount  directly  to  the  Delphi  DPG/DP210  Pump.  No 

external linkage or brackets are required to install this actuator. When 

de-energized, the 103 Series Electric Actuator provides the function of 

the fuel shutoff solenoid. This is accomplished by an internal spring that 

returns the fuel metering valve linkage to the no-fuel position when the 

actuator is de-energized.

Since there are no sliding parts in the 103 Series electric actuator and 

the unit is sealed, outstanding reliability and no maintenance are the 

resulting qualities.

 

12 or 24 V DC

 

Mounts directly to Delphi DPG/DP210 Pump

 

No external linkages or brackets required

 

Fast response; < 45 ms

 

Functions as a fuel shutoff solenoid when governor system is de-

energized

1

2

INTRODUCTION

SPECIFICATIONS

POWER INPUT

Operating Voltage  (B-Series)

                               (L-Series)

12 or 24 V DC Available                                                                                                                         

12 V DC

Normal Operating Current         

(B-Series) 

(L-Series)

1.9 A at 12 V DC

1.5 A at 24 V DC

1.3 A at 12 V DC

Maximum Current  

(B-Series)

(L-Series)

2.7 A at 12 V DC

1.9 A at 24 V DC

1.8 A at 12 V DC

ENVIRONMENT

Operating Temperature Range

 -40° to +180 °F  

[-40 ° to +83 °C]                                                                                                                          

Relative Humidity

up to 100 % 

Shock

20G, 11 ms

Vibration

± 4g, 25 - 100 Hz

Agency

RoHS Compliant

PHYSICAL

Dimensions

See 

Section 3 Outline Drawing

Weight

1.0 lbf

Mounting (B-Series)

                (L-Series)

Directly to Delphi Type DPG / 

DP210G/310G

Customer Specific Pump

MATING HARDWARE

All Models

Come with mounting hardware 

and O-ring

ADD103B

ADD103L

Packard Mating Connector

Customer Specific JD Mating 

Connector

ADE Models

Come with cable harness already 

installed to mating connector

The following installation kits are needed when installing these actuators on a Delphi DPG, DP210G, or DPGE: 

• 

ADD103B-12    12 V DC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

• 

ADD103B-24    24 V DC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Reviews: