1
Introduction
Combining 2.4GHz wireless technic and USB TV box technic,
UTV240 is known as a Hi-Tech product. Advanced 2.4GHz wireless
transmission technic effectively realizes CATV or A/V signal wireless
transmission in your house. Connected to your laptop or PC via USB
cable, you will be satisfied with enjoying your favorite channels and
Hi-Fi A/V programs while using computer. Because of high speed
USB2.0 port and progressive scanning technic, USB TV presents
stable and sharp pictures. Full function remote control makes it easier
to watch TV on computer. Attached with multi-function software, you
can sequence and rename channels according to your favorite. What's
more, some dynamic data can also be recorded on your computer from
recorder, video camera, web camera or other video devices and stored
onto the hard disc, to burn VCD, SVCD, and DVD disc via special
software. With scheduled recording function, you will not miss any
highlights. High-quality static picture capturing function converts
every highlight into digital album, and you can share with your friends
via uploading to the web.
1. Introduction
1.1 Brief introduction
1.2 Features
2.4 GHz ISM frequency band and four optional transmission channels.
Support all frequency TV wireless transmission and VCD, DVD signal
transmission.
433MHz IR remote return transmission, easy to operate.
IR transmitting, no extension cable needed.
Compatible with NTSC/PAL video transmission and stereo audio trans
-mission.
TV wall function to browse programs easily.
Channel list to sequence and rename channels at will.
Customizable brightness, contrast, sharpness, hue and saturation.
Static picture capturing and real time recording function.
Scheduled recording function to catch every highlight.
MPEG1/MPEG2 compressed format, convenient for recording disc.
Available shortcut key to control your TV like operating computer.
Full function remote control to turn the device off easily.
User friendly interface and colorful OSD.
26
S
T
IL
L
F
H
D
DVD
6.4 Retransmission function
If the output source is the video source with remote control function
like STB,DVD, video camera, the original matched remote control of
the unit can be directly used to control these video sources. It is not
necessary to operate at the side of transmitter.
Step one:
Refer to connection illustration, and make sure transmitter is well
connected and no obstacle between IR sensor of transmitter and that of
video source.
Step two:
If the remote control is pointed towards UTV324 receiver, you can
operate the video source of TXV2408.
Note
: Please try to stretch out the 433MHz antenna of transmitter and
put them far from the A/V cable, to make sure no transmission
interruption. If remote control is invalid, please check the place of
antenna when the transmitter and receiver are in the right place.
(Return transmission illustration)
nsm
ra
t
i
n
s
r
si
u
o
t
n
e
R
DVD
Remote
control
Product placing and retransmitting
