4
REV. 6/17
GB2628 INSTALLATION TOOL
TECHNICAL SPECIFICATIONS
Weight
- 20.8 lbs. (9.43 kg)
Hyd. pressure req'd
- 7,400 psi (510.2 bar) PULL
- 3.200 psi (220.6 bar) RETURN
Hyd. Power Source
- GB940 Powerunit or equivalent
- GB910 or GB912 Powerunit or equivalent
Hydraulic Oil
- See power unit for Hydraulic Oil specifications
Setting stroke
- 1.812” (46mm)
Rated pull load
- 45,769 lbs. (203.59 kN) @ 7,400 psi (210.2 bar)
Noise level
- No noise hazards identified. (20 max dB(A)
Vibration
- Tested– No vibration hazards.
Max Flow Rate
- 2 gpm (76L/M)
Max Inlet Temperature
- 118º F (47.8º C)
The GB2628 is a hydraulic installation tool capable of installing 1/2", 5/8" & 3/4" lockbolts and 12mm & 16mm MHP 10.9 lockbolts.
It weighs 20.8 lbs (9.43 kg) and can be operated in any position. It has a 1.812" (46 mm) rivet setting stroke and a rated pull load of
45,769 lbs (203.58 kN) @ 7,400 psi. (510.2 bar).
The GB2628 electric actuated installation tool operates on hydraulic pressure developed by the GB940 or equivalent power unit set at
7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with
2 feet (.61 m) of hydraulic hoses and couplings, electric actuator and cord.
The GB2628A air actuated installation tool operates on hydraulic pressure developed by the GB910, GB912 or equivalent power unit set
at 7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with
2 feet (.61 m) of hydraulic hoses, swivels and couplings, air actuator and tube.
ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE
NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY.
The GB2628 and GB2628A can be operated between 0ºF — 118ºF (-17.8ºC/47.8ºC)
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
