4
REV 12/22
GB512BOM/GB512ABOM INSTALLATION TOOL
SPECIFICATIONS
Weight
-
4 lbs. (1.81kg)
Hyd. Pressure Req'd.
-
5,400
-
5,600 psi (372
-
386 bar) PULL
2,200
-
2,400 psi (152
-
166 bar) RETURN
Hyd. Power Source
-
GB940, GB910 or GB912 Powerunit or equivalent.
Hydraulic Oil
-
See power unit for hydraulic oil specifications.
Setting Stroke
-
.750" (19.1mm)
Rated Pull Load
-
10,000 lbs. (44.5 kN)
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB512BOM & GB512ABOM can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
DESCRIPTION
WARNING
:
Any other use is forbidden.
The GB512BOM and GB512ABOM are hydraulic installation tools designed specifically for the efficient installation of
3/8”
BOM
®
fasteners.
These tools are unique in that they have a built in nose assembly which helps in limited clearance areas. These tools can be operated
in any position. They have a .750 (19.1mm) setting stroke and rated pull load of 10,000 lbs. (44.5 kN).
The GB512BOM (electric actuated) installation tool operates on hydraulic pressure developed by the GB940 Powerunit set at 5,400 psi.
(372 bar)
-
5,600 psi. (386 bar) maximum PULL pressure and 2,200 psi (152 bar)
-
2,400 psi (166 bar) maximum RETURN pressure. The
tool comes equipped with
12’ (3.7
m) of hydraulic hoses with quick disconnects and a electric control cord assembly.
The GB512ABOM (air actuated) installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at
5,400 psi. (372 bar)
-
5,600 psi (386 bar) maximum PULL pressure and 2,200 psi (152 bar)
-
2,400 psi (166 bar) maximum RETURN pressure.
The tool comes equipped with 12' (3.7 m) of hydraulic hoses with quick disconnects and an air line assembly.
