9
REV. 1/15
GB585/GB585A SELECTION CHART
DIA.
NOSE ASSEMBLY
5/8"
BOM20-585-41
3/4"
BOM24-585-46
5/8"
HP20-585-41
3/4"
HP24-585-46
16mm
HP20-585-41
*20mm
1
HP20MM-585-46
20-585-41
NOSE ASSEMBLY KEY
A ~The first set of numerical digits represent the diameter of the fastener in 32nds of
an inch (20/32)
5/8"
3/4"
20-585-41
24-585-46
HP8®
BLIND OVERSIZE MANDREL
MHP 10.9
C50L® AND HP8® ARE REGISTERED TRADEM ARKS OF ALCOA INC.
*FOR NON-PRODUCTION APPLICATIONS ONLY.
1) POWER UNIT REQUIRES ADUSTMENT TO 7,200 PSI FOR PULL AND 4,000 PSI FOR RETURN.
B ~The second set of digits represent ONE of the tool models which MAY be used
with this head (Model 585)
C ~The last set of numerical digits signify the "Gun Line," or reach of the pulling head
to the nearest tenth of an inch. (41 is 4.1 inch "Gun Line")
FASTENER
LOCKBOLT
HIGH TENSILE PULL TYPE
C50L®
4/11
TEFLON® IS A REGISTERED TRADEMARK OF E.I. DUPONT DE NEMOURS & CO. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING CO. SLIC-TITE® IS A REGISTERED
TRADEMARK OF LA-CO INDUSTRIES INC. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. MAGNA-GRIP IS A REGISTERED TRADEMARK OF ALCOA INC.
