4
11/21 REV 5/22
GB703SHVTPTS: INSTALLATION TOOL
SPECIFICATIONS
Handheld Weight
-
2.5 lbs. (1.1 kg)
Air pressure req'd
-
90
-
120 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.8 mm)
Rated pull load
-
2,200 lbs. (9.8 kN)
Noise level
-
Does not exceed 81.5 dB(A)
Vibration
-
less than 2.5 M/S
2
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703SHVTPTS can be operated between 0ºF
-
118º (
-
17.8ºC / 47.8ºC)
The GB703SHVTPTS is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held
in hand weighs 2.5 lbs. (1.1 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29 kg). It has a
.780” (19.8
mm) fastener
setting stroke.
The GB703SHVTPTS split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB703SHVTPTS does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB703SHVTPTS comes with 8 feet (2.4 m) of hose. Pull pressure varies with different length hoses. When ordering specify the shortest
length hose possible for your application this will provide optimum pull pressure. For example if your application only requires 6 feet
(1.8 m) of hose order an installation tool with
-
6 suffix (GB703SHVTPTS
-
6). Please consult our engineering department for specific applications.
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
THE GB703SHVTPTS IS SOLD FASTENER SPECIFIC. TO CHANGE TOOL OVER TO INSTALL OTHER FASTENERS, SEE CHART ON
PAGE 20 FOR PART NUMBERS. PLEASE CONTACT GAGE BILT FOR MORE INFORMATION.
