4
Rev 1/23
GB751SH INSTALLATION TOOL S/N: 1364 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
The GB751SH is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of blind rivets. This tool
’
s
unique
“
split
”
system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs
2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.50 lbs. (3.40 kg). It has a
.780” (19.8
mm) fastener setting stroke.
The GB751SH split handle riveter operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB751SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB751SH comes with 8 feet (2.4 m) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on page 20 for nose assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB751SH can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
SPECIFICATIONS
Hand Held Weight
-
2.50 lbs. (1.13 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.81 mm)
Rated pull load
-
2,200 lbs. (9.8 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested –
No Hazards Found
