4.16 Replacing LED lamps
Required tools:
Slotted screwdriver
Blade 2.4 mm x 0.4 mm x 60 mm, in
the kit [00341820]
Torx Bit TX20
6,3 mm (1/4")
[00340865]
Slotted screwdriver
Blade 10 mm x 1.6 mm x 200 mm
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service or authorised techni-
cians only!
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶
Electric parts should be repaired by a qualified electricians.
▶
After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Danger
Risk of electric shock due to live parts!
Death by electrocution
▶
Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
Upper interior fittings are removed.
4.16.1 Removing refrigerator compartment LED top lamp
1.
Create gap by working finger around the rim of LED lamp.
2.
Insert slotted screwdriver into the gap and remove LED top lamp in the direction
shown.
Repair
2021-09-30_9001640334
Copyright by BSH Hausgeräte GmbH
Page 198 of 817
