12
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
m
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into
the switched on LED lights for longer than 100 seconds.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
Fault table
--------
Disruption
Possible cause
Solution
The appliance does not work
The plug is not plugged into the mains
Connect the appliance to the electricity
supply
Power failure
Check whether other kitchen appliances
are working
Faulty fuse
Check in the fuse box to make sure that
the fuse for the appliance is OK
The appliance is not working, all the but-
tons are flashing
The network-cable plug is not plugged
into the mains
Check that the network cables of all the
appliances are connected
The circuit breaker is faulty
Look in the fuse box and check that the
circuit breakers for all the appliances are
in working order
One of the components in the appliance
has broken
Call the after-sales service
The appliance is not working
If the appliance is in operation for more
than four hours, the safety switch-off
function is activated
Switch the appliance on again
The button illumination does not work
The control unit is faulty
Call the after-sales service
The lighting is not working
The lighting is defective
Call the after-sales service
The
œ
button flashes
The metal filter is saturated
Clean the filter, see the
Cleaning and
maintenance
section
The remote control is not working
The batteries are flat
Replace the batteries; see section
Replacing the remote control batteries
Summary of Contents for AC 402
