42
en
Trouble shooting
3
Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
--------
Fault
Possible cause
Solution
The appliance does not work
The plug is not plugged into the mains
Connect the appliance to the power
supply
Power cut
Check whether other kitchen appliances
are working
The fuse is faulty
Check in the fuse box to make sure that
the fuse for the appliance is in working
order
The remote control is not working
The battery is flat
Change the batteries in the remote con-
trol, see section
batteries in the remote control"
on page 41
After the appliance has been switched
off, the LEDs 1-5
flash three times.
The battery is nearly flat
Change the batteries in the remote con-
trol, see section
batteries in the remote control"
on page 41
LED 1
or LED 2
flashes in the display
The grease filter or the odour filter is sat-
urated.
Clean the grease filter or change the
odour filter.
Summary of Contents for AC230101
Page 127: ......