en
Hob-based hood control
30
Hob-based hood control
You can connect your appliance to a suitable hob and,
in this way, control the functions of your appliance via
the hob.
You have the following options for connecting the
appliances with each other:
¡
Connecting the appliance via the Home Connect
app. If both appliances are Home Connect-compat-
ible, they can be connected using the Home Con-
nect app. Follow the instructions in the app.
¡
Connecting appliances directly with each other.
¡
Connecting appliances via the Wi-Fi home network.
Note:
Please note the safety precautions in the instruc-
tion manual for your appliance and ensure that they are
also observed when operating the appliance via the
hob-based hood control.
Tip:
Operating your appliance always takes priority. It is
not possible to use the hood controls on the hob dur-
ing this time.
Connecting directly
Requirements
¡
Your appliance is now switched off.
¡
Before connecting the appliances, reset all connec-
tions to your home network or other appliances. If
your appliance is connected directly to the hob, it
cannot be connected to your home network as well
and you will not be able to use Home Connect.
1.
Note:
Refer to the section entitled "Hob-based hood
control" in the instruction manual for your hob.
Switch on the hob and select the search mode.
2.
Press and hold the button until the LED for
Home Connect flashes in the LED display.
a
The appliance is connected to the hob if the LED for
Home Connect no longer flashes and lights up per-
manently.
Connecting via your home network
1.
Follow the instructions in
→
"Automatically connecting the appliance to the
WLAN home network (Wi-Fi)", Page 30
"Manually connecting the appliance to the WLAN
home network (Wi-Fi)", Page 31
.
2.
As soon as the appliance is connected to the home
network, establish the connection to the hob via the
Home Connect app.
3.
Follow the instructions on your mobile device.
Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
To be able to use Home Connect, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and
to the Home Connect app.
¡
Automatically connecting appliance to WLAN home
network (Wi-Fi) →
¡
Connecting appliance to WLAN home network (Wi-
Fi) manually →
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
¡
If you need your device's MAC address to connect
to your home network, you can find this next to the
rating plate →
this, Remove the filter →
.
Automatically connecting the
appliance to the WLAN home network
(Wi-Fi)
If your router has a WPS function, you can connect the
appliance to your WLAN home network (Wi-Fi) automat-
ically.
Note:
The appliance cannot be switched on during the
connection process. Press to cancel the process.
Requirements
¡
Wi-Fi on the router is activated.
¡
The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡
The Home Connect app is installed on your mobile
device.
¡
The appliance and the light are switched off.
1.
Press and hold the button until LED 7 flashes in
the LED display.
2.
Press .
a
LED 1 and LED 7 flash in the LED display.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
