Troubleshooting
en
35
2.
Remove the empty batteries.
3.
Insert the new batteries (3 V CR 2032).
4.
Close the cover.
5.
Dispose of the empty batteries in an environmentally
friendly manner.
12 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
12.1 Malfunctions
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The lighting does not
work.
Different causes are possible.
▶
Call the after-sales service.
→
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
Remote control not
working.
The batteries are flat.
▶
"Replacing the batteries in the remote control", Page 34
In the LED display,
the LEDs flash one to
five times after the
appliance is switched
off.
The batteries are almost empty.
▶
"Replacing the batteries in the remote control", Page 34
The lighting automat-
ically switches on as
soon as the appli-
ance is connected to
the power supply.
Demo mode is switched on.
▶
Press and hold and for approx. three seconds.
LED 1 flashes in the
LED display.
The grease filters are saturated.
▶
"Cleaning grease filters in the dishwasher", Page 34
▶
"Cleaning grease filters manually", Page 34
LED 2 flashes in the
LED display.
The odour filters are saturated.
▶
Summary of Contents for AC270101
Page 111: ......
