19
Filters and maintenance
Extractor hoods with two filter cartridges:
Warning:
The halogen bulbs must be swit-
ched off and cool.
1.
Depress the detent on the grease filters
in the direction of the arrow and fold
down the grease filter slightly. Detach
the grease filter by pulling it towards
yourself.
2.
Clean the grease filters.
3.
Re-insert the clean grease filters.
Removing and installing the activa-
ted carbon filter
Extractor hoods with a filter mat:
1.
Remove the filter; see grease filter.
❑
The wire grille is no longer required
when an activated carbon filter is
installed.
2.
Place the activated carbon filter on the
filter mat and clamp it in.
3.
Install the filter frame.
❑
See grease filter.
Activated carbon filter
5750.197 476.qxd 11.02.2005 7:50 Uhr Seite 19