12
Isolate the extractor hood by pulling out the
mains plug or switching off the fuse.
몇
Do not clean the extractor hood with abrasive
sponges or with cleaning agents which contain
sand, soda, acid or chlorine!
•
Clean the extractor hood with a hot soap
solution or a mild window cleaner.
IMPORTANT: No liquids may enter the air outlet
slot.
•
Do not scrape off dried-on dirt but wipe off with
a damp cloth.
•
When cleaning the grease filters, remove
grease deposits from accessible parts of the
housing. This prevents the risk of fire and
ensures that the extractor hood continues
operating at maximum
efficiency.
몇
Clean the operating buttons with a mild soapy
solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean the
operating buttons.
Stainless steel surfaces:
•
Use a mild non-abrasive stainless steel cleaner.
•
Clean the surface in the same direction as it
has been ground and polished.
•
We recommend our stainless steel cleaner no.
461731.
See enclosed service booklet for order
address.
Aluminium, coated and plastic surfaces:
•
Do not use dry cloths.
•
Use a mild window cleaning agent.
•
Do not use aggressive, acidic or caustic
cleaners.
Observe the warranty regulations in the enclosed
service booklet.
Cleaning and care
