6
The Instructions for Use apply to several versions of
this appliance. Accordingly, you may find
descriptions of individual features that do not apply
to your specific appliance.
This extractor hood complies with all relevant safety
regulations.
Repairs should be carried out by qualified
technicians only.
Improper repairs may put the user at considerable
risk.
Before using your appliance for the first time,
please read these Instructions for Use carefully.
They contain important information concerning your
personal safety as well as on use and care of the
appliance.
Please retain the operating and installation
instructions for a subsequent owner.
This appliance is labelled in accordance
with European Directive 2002/96/EG
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment – WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Remove the packaging from the appliance and
dispose of it properly. Pay attention to the fact that
there are accessories in the packaging.
Keep packaging elements out of the reach of
children!
Thoroughly clean the appliance before using it for
the first time.
Before operating the appliance for the first time,
check that the mains connection is in proper
working order.
In the event of malfunctions, first of all check the
household fuses. If the problem has nothing to do
with the power supply, please contact your
specialist dealer or your local Gaggenau after-sales
service.
If an F appears in the display :
•
See "Filters and maintenance" Section.
If is not possible to operate the extractor hood:
•
Disconnect the extractor hood from the mains
electricity supply by pulling out the plug or
switching it off at the main fuse box.
Wait for approx. 1 minute and then switch it on
again.
If you have any questions or if a fault occurs, please
call Customer Service.
(See list of Customer Service representatives).
When you call, please quote the following:
Enter the relevant numbers into the box above. The
E-Nr. (product no.) and FD (production date) are
shown on the nameplate which can be seen inside
the extractor hood after the filter frame has been
detached.
몇
The manufacturer of the extractor hoods
accepts no liability for complaints which can be
attributed to the design and layout of the
pipework.
Operating for the First Time
If you encounter a problem
E-Nr. FD
