background image

Switching the fan ON:

Press the 1, 2, 3 or Int button.

Switching the fan OFF:

Press the button.

Intensive setting

Maximum power is obtained at the intensive setting.
It is only required for short intervals.

The Int key for the intensive level should be
pressed when browning and frying in an open
pan.

If you have switched on the hood by selecting
the intensive level, it will be switched off again
automatically after 5 minutes.

If you press the Int key while the hood is
running at fan level 1, 2 or 3, the electronic
control will switch back automatically to the
previously selected fan level after 5 minutes.

If you would like to end the intensive level
before the five minutes have elapsed, press the
key (“Motor off”) or select a different level. It
is possible to switch off the extraction function
at any time by pressing the key (motor “off”).

Special functions

Intensive time:

You can set the intensive level running time to
3, 5 or 10 minutes by simultaneously pressing
the Int key and the 1, 2 or key and you can
store this setting. When delivered, the
appliance is set to five minutes, i.e. the
combination of the Int key and the key 2.

Fan follow-on:

Delayed shut-off is possible at any level. First
press the required key 1, 2, 3 or Int and then
press the 

key.

The delayed shut-off time for all levels is ten
minutes. After these ten minutes, the ventilation
switches off, but the lighting stays on.

Interval ventilation:

Interval ventilation is a special feature of this
appliance which periodically activates the fan
for five minutes every hour. You can activate
this function by simultaneously pressing the 0
key and, depending on the required extraction
capacity, the 1, 2 or key.

This mode of operation is indicated by
alternating illumination of the 

key together

with the corresponding fan level indicator. 

You can switch off interval ventilation by
pressing the 0 key.

Lighting:

Briefly press the 

button to switch the light

on and off.

The light can be switched on at any time, even
though the fan is switched off.

9

Summary of Contents for AI 280720

























Reviews: