9
Operating modes
You can use this appliance in the air extraction or the
recirculation mode.
Air extraction
Note:
The extracted air must neither be discharged into
an operating smoke or waste gas chimney nor into a
shaft that serves to ventilate rooms where heat-
producing appliances are installed.
▯
The local chimney sweep's consent must be
obtained if the exhaust air is to be routed to a
smoke or waste gas chimney that is not in
operation.
▯
A telescopic wall duct should be used if the exhaust
air is routed through the outside wall.
Recirculation
Note:
You must install an activated charcoal filter to
bind odors in the recirculation mode. Refer to the
manual or ask your specialist dealer for details of the
various options for operating the appliance in the
recirculation mode. You can obtain the necessary
accessories from specialist dealers, from our after-sales
service or in the online shop.
When used in recirculation mode, to reduce the Risk of
Fire and Shock use only conversion kit Model
AA413722. Please refer to the section “Accessories” in
this manual.
Getting to know the appliance
Here you can get to know your new appliance and get
information about accessories.
Control panel
All function buttons are highlighted when they are in an
active state. The indicator lamp of the "saturation
display" blinks.
The air sucked in is cleaned by the
grease filters and is routed outdoors
through a pipe system.
The aspirated air is cleaned by the grease
filters and an activated charcoal filter and
is returned to the kitchen.
1
Retract/extend the switches
2
Lighting
3
Control panel
4
Filter cover
@
Light On/Off
œ
Saturation display
ž
Run-on function
Ž
Intensive setting
3 Fan level 3
2 Fan level 2
1 Fan level 1
ÿ
Fan On/off
