23
Attaching the filter cover
1
Take hold of the side of the filter cover with both
hands.
2
Slide the filter cover onto the bolts of the holder
and lift it forwards until it snaps into place.
What to do in the event of a fault
Malfunctions often have simple explanations. Please read
the following notes before calling the after-sales service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
m
Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1). Do not look
directly into the switched on LED lights for longer
than 100 seconds.
Malfunction table
--------
Problem
Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance
to the electricity supply
Power cut
Check whether other
kitchen appliances are
working
Faulty fuse
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Appliance does
not switch on.
Filter cover not
closed.
Close the filter cover
fully.
The button illu-
mination does
not work.
The control unit
is faulty.
Call the after
sales ser-
vice.
The lighting
does not work.
The bulbs are
faulty.
Call the after
sales ser-
vice.
The
œ
button
flashes.
The filter is
dirty.
Clean the filter – see
section
Cleaning and
maintenance
.
The appliance
is not working,
all the buttons
are flashing
The network-
cable plug is
not plugged
into the mains
Check that the network
cables of all the appli-
ances are connected
The circuit
breaker is faulty
Look in the fuse box and
check that the circuit
breakers for all the
appliances are in work-
ing order
One of the com-
ponents in the
appliance has
broken
Call the after-sales
service
