26
Special functions
Intensive time:
•
You can set the intensive level running time to
3, 5 or 10 minutes by simultaneously pressing
the Int key and the 1, 2 or 3 key and you can
store this setting. When delivered, the
appliance is set to five minutes, i.e. the
combination of the Int key and the key 2.
Fan follow-on:
•
Delayed shut-off is possible at any level. First
press the required key 1, 2, 3 or Int and then
press the
key.
The delayed shut-off time for all levels is ten
minu-tes. After these ten minutes, the
ventilation switches off, but the lighting stays
on.
Interval ventilation:
•
Interval ventilation is a special feature of this
appliance which periodically activates the fan
for five minutes every hour. You can activate
this function by simultaneously pressing the 0
key and, depending on the required extraction
capacity, the 1, 2 or 3 key.
This mode of operation is indicated by
alternating illumination of the
key together
with the corresponding fan level indicator.
You can switch off interval ventilation by
pressing the 0 key.
Lighting:
•
Briefly press the
button to switch the light
on and off.
•
The light can be switched on at any time, even
though the fan is switched off.
•
Adjusting the brightness:
Hold down the
button until the desired
brightness is obtained.
Saturation indicator: F
•
The grease filter saturation display F flashes
after an operating time of 30 hours to you
indicate to you that you should clean the grease
filter. The grease filters can of course be
cleaned at any time, even if the grease filter
saturation display has not started to flash.
•
To cancel the display, press the F button.
