13
Caution:
disconnect the power supply before
replacing lamps (switch off the fuse)!
Caution:
lamps may still be hot shortly after use!
Risk of burns.
1
Detach the ring from the lamp cover. Note:
make sure that the glass will not fall out.
2
Pull out the lamp.
Defective lamps must only be replaced by lamps of
the same type! (12 V/20 W/G4 lampholder)
Inserting the lamp
1
Insert the lamp in the lampholder.
Note:
do not touch the halogen lamps with your
hands. Use a cloth and touch the lamp only on
its edges.
2
Engage the lamp cover.
3
Connect the appliance to the mains again.
Lamp replacement
Summary of Contents for AW 250
