13
1
Switch the extractor hood off and isolate it by
removing the mains plug or by switching off the
fuse.
몇
When operating, the fluorescent light bulbs get
very hot. Even after a while, there is still a risk of
being burnt.
2
Remove the metal-mesh filters (see "Removing
and inserting the metal-mesh grease filters").
3
Loosen the screws for the mounting rails..
4
Carefully remove the glass panes.
5
Remove the sockets for the fluorescent light
bulbs.
6
Replace the fluorescent light bulbs with new
ones available commercially (36 W, 840 Cool
White, socket 2 G 11).
몇
Risk of breakage!
Replacing the light bulbs
