background image

11

After

­

sales service

Our after-sales service is there for you if your appliance 
needs to be repaired. We will always find an appropriate 
solution in order to avoid unnecessary visits by 
engineers.

When calling us, please give the product number (E no.) 
and the production number (FD no.) so that we can 
provide you with the correct advice. The rating plate 
bearing these numbers can be found on the appliance.

To save time, you can make a note of the number of your 
appliance and the telephone number of the after-sales 
service in the space below, should it be required.

Please note that a visit from an after-sales service 
engineer is not free of charge, even during the warranty 
period.

Please find the contact data of all countries in the 
enclosed customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest 
assured that the repair will be carried out by trained 
service technicians using original spare parts for your 
domestic appliance.

E no.

FD no.

After-sales service 

O

GB

0344 892 8988 
Calls charged at local or mobile rate.

IE

01450 2655 
0.03 € per minute at peak. Off peak 0.0088 € 
per minute.

AU

1300 368 339

NZ

09 477 0492

Summary of Contents for AW 442 190 CN













Reviews: