background image

7

Saturation display

If the metal grease filters are saturated, the 

œ

 button 

flashes.

If you have not yet done so, the metal grease filters 
should be cleaned now.

For instructions on how to clean the metal grease filters, 
please refer to the 

Cleaning and maintenance

 section.

Resetting the saturation indicator

Press the 

œ

 button.

Lighting

The lighting can be switched on and off independently 
of the ventilation system.

Switching on or off

Press the 

ž

 button.

Setting the brightness

Press and hold the 

ž

 button until the desired 

brightness is reached.

Safety shut-off

For your safety, the appliance has a safety shut-off 
function. The lighting switches off after 12 hours and 
the fan after 4 hours if the appliance is not operated 
during this time.

Cleaning and maintenance

m

Risk of burns!

The appliance becomes hot during operation. Allow the 
appliance to cool down before cleaning.

m

Risk of electric shock!

Penetrating moisture may result in an electric shock. 
Clean the appliance using a damp cloth only. Before 
cleaning, pull out the mains plug or switch off the circuit 
breaker in the fuse box.

m

Risk of electric shock!

Do not use any high-pressure cleaners or steam 
cleaners, which can result in an electric shock.

m

Risk of injury!

Components inside the appliance may have sharp 
edges. Wear protective gloves.

Cleaning agents

Observe the information in the table to ensure that the 
different surfaces are not damaged by using the wrong 
type of cleaning agent. Do not use

harsh or abrasive cleaning agents,

cleaning agents with a high concentration of 
alcohol,

hard scouring pads or sponges,

high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Follow all instructions and warnings included with the 
cleaning agents.

Area

Cleaning agents

Stainless steel

Hot soapy water: 
Clean with a dish cloth and dry with a 
soft cloth.

Clean stainless steel surfaces in the 
direction of the grain only.

Special stainless steel cleaning prod-
ucts are available from our after-sales 
service or from specialist retailers. 
Apply a very thin layer of the cleaning 
product with a soft cloth.

Aluminium and plas-
tic

Glass cleaner: 
Clean with a soft cloth.

Summary of Contents for AW 442 190 CN













Reviews: