12
en-us
Familiarizing yourself with your appliance
Colors and display
Colors
The various colors serve to guide you in the various
adjustment situations.
Presentation
The presentation of symbols, values or the entire display
changes depending on the situation.
Automatic door opening
When you touch the
!
symbol, the appliance door
springs open and you can open it fully with the handle
recess at the side.
Automatic door opening does not work when the child
lock is activated or in the event of a power failure. You
can open the door manually with the handle recess at the
side.
Standby
The appliance switches to standby mode if no function is
set or the childproof lock is activated.
The brightness of the control panel is dimmed in standby
mode.
Notes
▯
Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
▯
The brightness of the display depends on the vertical
viewing angle.
▯
You can change the display and the brightness at any
time in the basic settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
▯
If "Standby screen = off" is selected in the factory
setting, you must turn the function selector to exit the
standby mode.
▯
The standby display appears again if you have not
made any settings for a long while after activation.
▯
The cooking compartment lighting goes out after a
little while if the door is open.
Additional information
(
and
)
By touching the
(
symbol, you can call up additional
information. For example, information on the type of
heating set or on the current temperature of the cooking
compartment.
Note:
During continuous operation after heating up,
slight deviations in temperature are normal.
The
)
symbol appears for important information and
indicates that an action is required. Important information
on safety and operating status is also occasionally
displayed automatically. These messages disappear
automatically after a few seconds, or must be confirmed
with
™
.
With Home Connect messages, the Home Connect
status additionally appears in the
)
. You will find more
information about this in the section entitled
.
Orange
First settings
Main functions
Blue
Basic settings
Cleaning
White
Adjustable values
Zoom
The display of the setting you are just
changing is enlarged.
Just before it elapses, a duration that
is just elapsing is enlarged (e.g. the
last 60
seconds in the case of timers).
Minimized
display screen
After a short time, the display screen
is minimized and only the most
important things are displayed. This
function is the default and can be
modified in the basic settings.
)
Summary of Contents for BO 451 612
Page 1: ...DJJHQDX Use and care manual BO 450 451 612 Built in oven...
Page 65: ......
Page 66: ......
Page 67: ......
